Free tools
Deadhead Cost Calculator
Enter the empty miles of a trip, your MPG and the fuel price to see what the deadhead costs. Add the loaded miles and the load's pay to see what the empty miles do to its rate.
No login, no account and no card. Everything runs in your browser, and nothing you type is sent to us. A link you choose to copy from a calculator holds its numbers; the invoice generator and the IFTA calculator have no link.
Deadhead Cost Calculator: enter your numbers
Every field is optional: leave blank what does not apply. Nothing you type is sent anywhere, and the page address does not change as you type. Leaving or reloading the page clears the form.
Copy link puts a link on your clipboard that holds the numbers on this page, and nothing else. Whoever opens it, and this site's server when it is opened, will see those numbers.
Miles
To the pickup, between loads, or home empty.
Optional. Needed for the deadhead percentage and the rates.
What an empty mile costs
Fuel is estimated from the price and MPG. Add anything else you pay per empty mile.
An empty truck often does a little better than a loaded one.
Optional: driver pay on empty miles, tires and maintenance, tolls.
The load (optional)
Add what the load pays to see what the empty miles do to its rate.
Everything the load pays: linehaul, fuel surcharge and accessorials.
Result
Enter the empty miles, your MPG and the fuel price, or press Load example to see how it works.
This calculator is educational. It estimates from the miles, MPG, price and costs you enter, and it is not accounting or financial advice.
How it works
What are deadhead miles?
Deadhead miles are the miles a truck drives with an empty trailer: from where the last load delivered to where the next one picks up, between a terminal and a shipper, or home at the end of a run. Nobody pays a rate on them, and they cost almost as much to drive as loaded miles.
Some people use bobtail for a tractor running with no trailer at all and deadhead for a tractor pulling an empty one. For working out the cost the two are treated the same way: miles driven that earn nothing.
How to calculate the cost of deadhead miles
- Fuel: divide the empty miles by your MPG and multiply by the price per gallon.
- Other costs: multiply the empty miles by whatever else a mile costs you, such as driver pay on empty miles, tires and maintenance.
- Add the two for the deadhead cost of the trip.
- Divide by the loaded miles to see how much each paid mile has to carry.
A simpler estimate multiplies the empty miles by your whole cost per mile from the cost per mile calculator. Enter that figure, less its fuel part, as the other cost per empty mile if you want fixed costs counted too.
Deadhead percentage
Deadhead percentage is the empty miles divided by all the miles of the trip, loaded plus empty. It is the quickest measure of how much of your driving is unpaid. Worked out for a month rather than a trip, it shows whether your lanes and your planning are keeping the truck loaded.
There is no figure that is right for everyone. Some freight and some equipment, tankers and other specialized trailers for example, run empty one way as a matter of course, and the rates in those lanes are expected to pay for it.
What empty miles do to your rate per mile
A load's pay does not change when you drive farther to reach it, but the miles do. Divide the pay by the loaded miles and you get the rate you were quoted; divide it by loaded plus empty miles and you get what the load pays for every mile you actually drive. The difference between the two is what the empty miles cost you in rate.
Enter what the load pays and the calculator shows both rates and the gap. The rate per mile calculator does the same with the linehaul and fuel surcharge entered separately, and the break-even rate calculator builds a month's empty miles into the rate you need.
Deciding whether a load is worth the empty miles
The empty miles belong to the load that causes them. Before accepting a load, add the drive to its pickup to its own miles and judge it on the rate per total mile. A load with a lower rate and a pickup nearby can leave more than a load with a higher rate and a long empty run to reach it.
Think one load ahead as well: a delivery into an area with little outbound freight can mean a long empty drive afterwards, which is a cost of the first load even though it shows up later. To weigh all of one load's costs, use the load profit calculator; for the fuel alone, the fuel cost calculator.
Example: the cost of an empty run
A trip worked through
A truck drives 120 empty miles to a pickup for a load of 680 miles that pays $1,900.00. It gets 6.50 MPG, fuel is $3.850 a gallon (an example price), and each empty mile costs another $0.60 in driver pay and wear.
You enter
- Deadhead miles
- 120
- Loaded miles
- 680
- Truck MPG
- 6.50
- Fuel price per gallon
- $3.850
- Other cost per empty mile
- $0.60
- Load pay
- $1,900.00
It works out
- Fuel for empty miles
- $71.08 (18.5 gallons)
- Other empty-mile cost
- $72.00
- Deadhead cost
- $143.08
- Carried per loaded mile
- $0.21
- Deadhead
- 15.0%
- Rate per loaded mile
- $2.79
- Rate per total mile
- $2.38
- Share of load pay
- 7.5%
Driving 120 miles empty costs approximately $143.08: $71.08 of fuel and $72.00 of other costs. Spread over the 680 loaded miles, that is $0.21 that every paid mile has to carry. The load pays $2.79 per loaded mile, but $2.38 per mile actually driven, because 15.0% of the trip is empty. The empty miles take 7.5% of what the load pays, before any cost of the loaded miles.
Frequently asked questions
How do you calculate deadhead cost?
Multiply the empty miles by what an empty mile costs you. For fuel that is the empty miles divided by your MPG, times the price per gallon; add driver pay and any other cost you carry on empty miles. The calculator adds the parts and shows the total.
How do I calculate deadhead percentage?
Divide the empty miles by the total miles, loaded plus empty, and multiply by one hundred. A trip with 100 empty miles and 900 loaded miles has 1,000 total miles and a deadhead percentage of 10 percent.
Do brokers or shippers pay for deadhead miles?
Usually not as a separate line: the rate is quoted on loaded miles and is expected to cover the trip. Whether anything is paid for empty miles is a matter of the rate agreement, so if a long empty run is involved it is worth raising before the load is accepted.
Should fixed costs be part of deadhead cost?
That depends on the question. For whether one more load is worth taking, the costs that the extra empty miles add are the relevant ones: fuel, driver pay, wear. For what your empty miles cost over a month, your whole cost per mile times the empty miles is the fuller answer.
Does an empty truck use less fuel?
Generally a little, because it is lighter, though speed, wind and terrain matter as much as weight. If you track your empty MPG separately, enter that; otherwise your usual figure gives a slightly cautious estimate.
Is anything I type saved or sent?
No. The calculation runs in your browser. Nothing you type is sent to CargoRoute or anyone else, and nothing is saved on our side or in your browser's storage. The page address does not change as you type. If you press Copy link, the link you copy contains your numbers: whoever you give it to, and this website when they open it, will receive them in the address, as with any link, and a browser may keep a link it has opened in its history. A page opened from such a link clears the numbers from its own address at once. Press Reset to clear the form.
Related trucking calculators
- Fuel Cost CalculatorEstimate the gallons and fuel cost of a trip from your miles, MPG and fuel price.
- Rate Per Mile CalculatorCalculate a load's rate per loaded mile and per total mile, with deadhead counted.
- Load Profit CalculatorCalculate profit, rate per mile and break-even rate for a single load.
- Break-Even Rate CalculatorFind the rate per mile that covers your costs, and the rate that leaves your margin.
Counting empty miles on every load?
CargoRoute keeps the loaded and empty miles on each load, for per-mile pay and reports, alongside the load's revenue, fuel and other expenses, so a lane's empty miles are on record rather than remembered.
CargoRoute is currently available by invitation while we onboard our first carriers.