Free tools
Rate Per Mile Calculator
Enter what a load pays and its loaded and empty miles to see the rate per loaded mile and per total mile. Add your cost per mile to see what the load leaves.
No login, no account and no card. Everything runs in your browser, and nothing you type is sent to us. A link you choose to copy from a calculator holds its numbers; the invoice generator and the IFTA calculator have no link.
Rate Per Mile Calculator: enter your numbers
Every field is optional: leave blank what does not apply. Nothing you type is sent anywhere, and the page address does not change as you type. Leaving or reloading the page clears the form.
Copy link puts a link on your clipboard that holds the numbers on this page, and nothing else. Whoever opens it, and this site's server when it is opened, will see those numbers.
What the load pays
The base rate, before fuel surcharge and extras.
Fuel surcharge and accessorials
Detention, layover, stop-off and similar charges the customer pays.
Miles
Loaded miles are the ones you are paid for. Empty miles are driven to reach the pickup or to get home.
Your cost per mile (optional)
Add what a mile costs you to run, per total mile, to see what the load leaves.
Result
Enter what the load pays and its miles, or press Load example to see how it works. Leave blank what does not apply.
This calculator is educational. It divides the pay and miles you enter, and it is not a rate quote, a market rate or financial advice.
How it works
What is rate per mile in trucking?
Rate per mile (RPM) is what a load pays divided by the miles it takes. It turns loads of different lengths and different totals into one number you can compare: a short load with a small total can pay more per mile than a long one with a large total.
There is more than one rate per mile for the same load, and they are easy to mix up. The rate per loaded mile divides the pay by the miles you haul the freight. The rate per total mile divides the same pay by every mile you drive for the load, including the empty miles to the pickup. A rate quoted on a load board or by a broker is normally per loaded mile.
How to calculate rate per mile
- Add up what the load pays: the linehaul rate, plus the fuel surcharge and any accessorials if you want the all-in figure.
- Divide by the loaded miles for the rate per loaded mile.
- Add the deadhead miles to the loaded miles, and divide the same pay by that total for the rate per total mile.
- Divide the linehaul alone by the loaded miles to compare with a posted rate that leaves out the fuel surcharge.
Use the miles you will really drive. Paid miles on a rate confirmation often come from a mileage guide and can be lower than the miles on the road, which makes the true rate per mile lower than the one on paper.
Rate per loaded mile versus rate per total mile
The two figures are the same only when there are no empty miles. Every deadhead mile is driven for no pay, so it lowers the rate per total mile while the rate per loaded mile stays where it was. A load that looks strong per loaded mile can be ordinary once a long empty run to the pickup is counted.
The rate per total mile is the one to hold against your cost per mile, because your costs run on every mile. If you do not know that figure yet, the cost per mile calculator works it out from a month of costs and miles, and the deadhead cost calculator shows what the empty miles of one trip cost.
Linehaul rate, fuel surcharge and the all-in rate
Some rates are quoted all-in: one number that already includes fuel. Others are a linehaul rate with a fuel surcharge on top, and sometimes accessorials such as detention or a stop-off charge. Comparing an all-in rate with a linehaul-only rate is comparing two different things.
This calculator shows both: the rate per loaded mile on everything you entered, and the linehaul per loaded mile on the base rate alone. To see how a surcharge is worked out from the price of diesel, use the fuel surcharge calculator.
What is a good rate per mile?
There is no single good rate. Rates move with the lane, the season, the equipment and the freight market, and a rate that works for one truck loses money for another. The useful test is your own: a rate per total mile above your cost per total mile leaves something, and one below it does not.
Enter your cost per mile in the calculator to see what a load leaves after it. For the lowest rate you can accept, and the rate that keeps a margin, see the break-even rate calculator; for one load's full costs, the load profit calculator.
Example: one load's rate per mile
A load worked through
A load pays $2,650.00 in all, linehaul plus fuel surcharge, for 950 loaded miles, with 100 empty miles to reach the pickup. The truck costs $1.77 per mile to run.
You enter
- Total pay
- $2,650.00
- Loaded miles
- 950
- Deadhead miles
- 100
- Cost per total mile
- $1.77
It works out
- Rate per loaded mile
- $2.79
- Rate per total mile
- $2.52
- Linehaul per loaded mile
- $2.53
- Deadhead
- 9.5%
- Trip cost
- $1,858.50
- Left after your costs
- $791.50
- Left per total mile
- $0.75
This load pays $2.79 per loaded mile and $2.52 per total mile, once the 100 empty miles (9.5% of the trip) are counted. At your cost of $1.77 per mile, the trip costs about $1,858.50, which leaves $791.50.
Frequently asked questions
How do I calculate rate per mile for a load?
Divide what the load pays by its miles. Using loaded miles gives the rate per loaded mile; using loaded plus empty miles gives the rate per total mile. The calculator shows both from the same numbers.
Should I use loaded miles or total miles?
Use both, for different questions. Loaded miles let you compare the load with a posted rate, which is normally quoted per loaded mile. Total miles tell you what you earn for every mile you actually drive, which is the figure to compare with your cost per mile.
Does rate per mile include the fuel surcharge?
It depends on who is quoting. An all-in rate includes it; a linehaul rate does not. Enter the linehaul and the fuel surcharge separately and the calculator gives the all-in rate per loaded mile and the linehaul-only rate side by side.
Why is my rate per total mile lower than the rate I was quoted?
Because the quoted rate is per loaded mile and you also drive empty miles for the load. The pay stays the same while the miles go up, so the rate for each mile driven goes down. The deadhead percentage shows how much of the trip is empty.
Is a higher rate per mile always the better load?
No. A short load with a high rate per mile can earn less in a day than a longer load with a lower one, and a high rate into an area with no freight out can mean a long empty drive afterwards. Rate per mile is one measure to weigh with the total pay, the time and the next load.
Is anything I type saved or sent?
No. The calculation runs in your browser. Nothing you type is sent to CargoRoute or anyone else, and nothing is saved on our side or in your browser's storage. The page address does not change as you type. If you press Copy link, the link you copy contains your numbers: whoever you give it to, and this website when they open it, will receive them in the address, as with any link, and a browser may keep a link it has opened in its history. A page opened from such a link clears the numbers from its own address at once. Press Reset to clear the form.
Related trucking calculators
- Load Profit CalculatorCalculate profit, rate per mile and break-even rate for a single load.
- Break-Even Rate CalculatorFind the rate per mile that covers your costs, and the rate that leaves your margin.
- Deadhead Cost CalculatorSee what empty miles cost in fuel and other expenses, and what they do to your rate.
- Fuel Surcharge CalculatorCalculate a fuel surcharge per mile and per load from the fuel price, base price and MPG.
Comparing every load by hand?
CargoRoute keeps each load's rate with its loaded and empty miles, and reports revenue less driver pay, fuel, tolls and other expenses for every delivered load, so the numbers are already there when you look back at a lane.
CargoRoute is currently available by invitation while we onboard our first carriers.