Free tools
Load Profit Calculator
Enter what one load pays and what it costs to run, and see its profit, margin, rate per mile and break-even rate. Every field is optional, and the calculation runs in your browser: nothing you type is sent.
No login, no account and no card. Everything runs in your browser, and nothing you type is sent to us. A link you choose to copy from a calculator holds its numbers; the invoice generator and the IFTA calculator have no link.
Load Profit Calculator: enter your numbers
Every field is optional: leave blank what does not apply. Nothing you type is sent anywhere, and the page address does not change as you type. Leaving or reloading the page clears the form.
Copy link puts a link on your clipboard that holds the numbers on this page, and nothing else. Whoever opens it, and this site's server when it is opened, will see those numbers.
Revenue
What the load pays.
The base rate, before fuel surcharge and extras.
More revenue
Detention, layover, lumper reimbursement, TONU and similar charges to the customer.
Miles
Miles driven empty, such as to the pickup.
Costs
Fuel is estimated from your miles, price and MPG.
More costs
Detention you paid out that is not already in Driver pay. Detention the customer pays you goes under More revenue.
Result
Enter the rate, the miles and your costs, or press Load example to see how it works. Leave blank what does not apply.
This calculator gives an estimate from the numbers you enter. It does not know your other costs, taxes or contracts, and it is not financial, tax or accounting advice.
How it works
What is profit per load?
Profit per load is what one load leaves you after you subtract what it cost to run. Revenue is everything the customer pays: the linehaul (the base rate for moving the freight), any fuel surcharge, and accessorial charges such as detention, layover or lumper reimbursement. Costs are what you spent to move it: fuel, tolls, driver pay, dispatcher commission and the other expenses that belong to that one load.
The result is the profit on the load before fixed costs. It leaves out costs that are not tied to a single load, such as insurance, truck and trailer payments, permits and office costs, unless you add a share of them under other load expenses. The cost per mile calculator covers those.
How to calculate trucking load profit
- Add up the revenue: linehaul, fuel surcharge, accessorials and any other revenue.
- Add up the miles: loaded miles plus deadhead miles are the total miles.
- Estimate fuel: total miles divided by the truck's miles per gallon gives the gallons, and gallons times the price per gallon gives the cost.
- Add the other costs of that load: tolls, driver pay, dispatcher commission, lumper, detention you paid out, and anything else it cost.
- Profit is revenue minus costs. Profit margin is profit divided by revenue.
Dispatcher commission is often a percentage of what the load pays. This calculator takes it either way. Entered as a percentage, it is taken from total revenue: the linehaul plus every other revenue line. If your agreement takes a percentage of the linehaul only, enter the dollar amount instead.
Rate per mile versus profit per mile
Rate per mile (RPM) is revenue divided by miles. It says what a load pays, not what it leaves you. Two loads with the same RPM can leave very different profit once fuel, tolls and driver pay come out. Profit per mile is profit divided by total miles, and it is the better figure for comparing loads because it counts the empty miles and the costs.
Check which miles an RPM uses. Rate per loaded mile divides by loaded miles only, so it looks higher than rate per total mile whenever you drive empty. A posted rate is usually quoted on loaded miles, while your costs run on every mile you drive.
How deadhead affects profitability
Deadhead is miles driven empty, usually to reach a pickup or after a delivery. Those miles earn nothing and still cost fuel, tire and maintenance wear, and time. This calculator counts deadhead in the total miles and in the fuel estimate, so it lowers the rate per total mile and the profit per mile. The deadhead percentage is deadhead miles divided by total miles.
A load that pays well per loaded mile can still be a poor load if it starts far from where you are, or ends far from where the next load is.
How fuel changes profit
Fuel is one of the largest costs of a load, and this calculator estimates it from the miles, the price and the truck's MPG. In the example below the truck burns about 161.5 gallons, so each 10 cents on the price of a gallon moves the fuel cost by about $16.16.
A fuel surcharge on the rate confirmation is revenue, not a reduction of your fuel cost, so enter it under More revenue. Real fuel use also changes with load weight, speed, terrain and weather, which is why the figure is an estimate. Use the MPG you actually get.
What is the break-even rate?
The break-even rate is the least a load can pay for its revenue to cover the costs you entered. The calculator gives it per total mile and per loaded mile. A load paying less loses money on the costs entered; the part above it is profit.
It counts all the revenue on the load, including any fuel surcharge you entered, and it keeps your other costs, driver pay included, at the amounts you entered. If the driver is paid a percentage of the load, those costs would fall with a lower rate, so the true break-even is somewhat lower. The driver pay calculator shows what each way of paying a driver comes to.
When commission is a percentage, it grows with the rate, so the calculator solves for it: the break-even revenue is the other costs divided by one minus the commission rate. That is why the break-even rate differs from the cost per mile by the commission's share of the rate: at a 10% commission the gap is about 11%, which is not slight.
Example: a 1,050-mile load
One load, worked through
A load pays $2,400.00 linehaul. The truck runs 950 loaded miles and 100 empty miles to the pickup, at 6.5 MPG with diesel at $3.850 a gallon. Tolls and driver pay are known, and the dispatcher takes 5% of total revenue.
You enter
- Linehaul
- $2,400.00
- Loaded miles
- 950
- Deadhead miles
- 100
- Fuel price per gallon
- $3.850
- Truck MPG
- 6.5
- Tolls
- $45.00
- Driver pay
- $720.00
- Dispatcher commission
- 5% of total revenue
It works out
- Total miles
- 1,050
- Deadhead
- 9.5%
- Fuel gallons
- 161.5
- Fuel cost
- $621.92
- Commission
- $120.00
- Total cost
- $1,506.92
- Profit
- $893.08
- Margin
- 37.2%
- Rate per total mile
- $2.29
- Profit per total mile
- $0.85
- Break-even rate
- $1.39 per total mile
This load leaves approximately $893.08 after the costs you entered, before your fixed costs such as insurance and truck payments. Your break-even rate is $1.39 per total mile ($1.54 per loaded mile).
Frequently asked questions
What is a good profit per load or profit margin?
There is no single number. It depends on your fixed costs, your equipment, your lanes and how much of your time a load takes. A load is worth taking when it covers its own costs and also contributes toward the costs that run whether or not the truck moves. Use the calculator to compare loads with each other and with your break-even rate.
Does it include insurance, truck payments and other overhead?
Not unless you add them. It works on one load. You can enter a share of monthly costs under other load expenses, or use the cost per mile calculator to see those costs per mile.
Should deadhead miles be counted?
For cost, yes: empty miles burn fuel and wear the truck, so they are in the total miles and in the fuel estimate. To compare a posted rate, look at the rate per loaded mile as well, which divides by loaded miles only.
How is dispatcher commission calculated?
You can enter a dollar amount or a percentage. A percentage is taken from total revenue: the linehaul, fuel surcharge, accessorial and other revenue together. Check your dispatch agreement, and enter a dollar amount if it takes a percentage of the linehaul only.
Why is fuel left out of my result?
Fuel is estimated only when you enter miles, a price per gallon and the truck's MPG above zero. If one is missing the result says so and leaves fuel out, rather than counting it as zero.
How accurate is the result?
It is an estimate from the figures you enter. Actual fuel use, tolls and charges differ from load to load, and the calculator knows nothing about your other costs, taxes or contracts. It is not financial, tax or accounting advice.
Is anything I type saved or sent?
No. The calculation runs in your browser. Nothing you type is sent to CargoRoute or anyone else, and nothing is saved on our side or in your browser's storage. The page address does not change as you type. If you press Copy link, the link you copy contains your numbers: whoever you give it to, and this website when they open it, will receive them in the address, as with any link, and a browser may keep a link it has opened in its history. A page opened from such a link clears the numbers from its own address at once. Press Reset to clear the form.
Related trucking calculators
- Rate Per Mile CalculatorCalculate a load's rate per loaded mile and per total mile, with deadhead counted.
- Cost Per Mile CalculatorCalculate your trucking cost per mile and break-even rate from the costs you enter.
- Fuel Cost CalculatorEstimate the gallons and fuel cost of a trip from your miles, MPG and fuel price.
- Driver Pay CalculatorCalculate driver pay by percentage, miles or a fixed amount, including deductions.
Doing this for every load?
CargoRoute tracks the actual revenue, driver pay, fuel, tolls and other expenses on each load, and reports load and truck profitability, so you do not have to work out every load by hand.
CargoRoute is currently available by invitation while we onboard our first carriers.